• Selection of materials for ABS molds

  ABS (Acrylonitrile Butadiene Styrene), known for its balanced toughness, rigidity, and flowability, is a staple in general engineering plastics. Selecting the right mold material requires aligning the

  2026/01/16 Injection Molds

• Temperature Zone Control Methods for Hot Runner Injection Molding

  Hot runner technology is widely used in precision and high-volume injection molding due to its material savings, efficiency, and improved part quality. Temperature zone control is the core of a stable

  2026/01/15 Injection Molding

• A Concise Guide to Ejector Pin Wear Inspection and Replacement

  Ejector pins are among the most critical and vulnerable components in plastic injection molds. Their surface condition and dimensional accuracy directly impact part appearance and stability. Operating

  2026/01/15 Injection Molds

• Thin-Wall Injection Molding Process Requirements

  Thin-wall injection molding is a critical technology driven by the trend toward lightweight and miniaturized products. It is generally defined by a wall thickness ≤ 1mm or a flow length-to-thickness r

  2026/01/15 Injection Molding

• A Concise Guide to Mold Steel Selection for ABS Injection Molding

  ABS (Acrylonitrile Butadiene Styrene) is renowned for its excellent impact resistance, fluidity, and dimensional stability, making it a staple in home appliances, electronics, and automotive interiors

  2026/01/15 Injection Molding

• Daily Maintenance Specifications for Plastic Injection Molds

  Daily maintenance of plastic injection molds is a core process critical to ensuring continuous production, improving product qualification rates, and extending mold service life. It must adhere to the

  2026/01/14 Injection Molds

• Common Plastics for Thin-Wall Injection Molding

  Thin-wall injection molding typically refers to parts with a wall thickness ranging from 0.2 to 1.5 mm. This process imposes stringent requirements on the plastic's melt flow rate (MFR), mechanica

  2026/01/14 Injection Molding

• Injection Molding Holding Pressure Adjustment Guide

  Holding pressure is a critical parameter in the injection molding process. Its primary function is to apply continuous pressure to the molten plastic after the mold cavity is filled to compensate for

  2026/01/14 Injection Molding