Common problem

Injection Molds for Home Appliance Housings in China: Process Selection for High-Gloss Panels and Matte Textures

2026-11-16 13:36:12 Chinese Injection Molding

Injection Molds for Home Appliance Housings in China: Process Selection for High-Gloss Panels and Matte Textures Appearance process directly determines visual texture, mold cost and mass production stability of home appliance housings. High-gloss panels and matte textures are the two most mainstream appearance solutions. They differ greatly in mold machining, molding control, defect tolerance and long-term service performance. Selection should not only depend on visual effect, but also combine product positioning, raw material, assembly requirement and production control capacity.

Process characteristics of high-gloss panel molding

High-gloss finish relies on mirror polishing of mold cavities, generally SPI A2 and A3 grade. Mold steel such as S136 and NAK80 with superior polishing performance is preferred. Polishing work takes long time and requires skilled operators and clean working environment. Standard high-gloss molding needs stable mold temperature control. Premium home appliance panels adopt RHCM rapid heat cycle molding. The mold surface is heated quickly before injection to improve melt replication and reduce weld lines, flow marks and sink marks, then cooled rapidly after filling to shorten cycle time. Tiny scratches, dust particles and gate marks will be obvious under light reflection, so gate position needs optimization in DFM review to minimize weld lines from multi-gate design. Vent slots must be arranged densely to avoid burning and carbon deposit. ABS, PC/ABS and PMMA with good fluidity and stable gloss are common materials for high-gloss parts. Glass-filled materials are not suitable for non-spray high-gloss products due to floating fiber risk. High-gloss housings have obvious drawbacks: fingerprints and oil stains are easy to remain, and minor scratches are visible after collision. Mold maintenance cost is high. Once the mirror surface is rusted or scratched, repair is difficult and polishing will cause long production shutdown.

injection mould

Process characteristics of matte texture panels

Matte textures include fine sand blasting, chemical etching and laser engraving, corresponding to SPI C grade or VDI 3400 standards. Fine matte finish can be achieved by sand blasting, delicate grain by chemical etching, while laser texturing is suitable for complex and partial gradient patterns. Textures can hide sink marks, slight flow marks and weld lines, bringing wider process window and stable yield. Matte texture molds do not need time-consuming mirror polishing, so the machining cycle and cost are lower. But draft angle is mandatory for textured surfaces. Deeper and coarser textures require larger draft angles, otherwise texture will be scratched, whitened or incomplete during ejection. Uniformity of steel structure affects etching quality. Laser texturing supports zoning and gradient texture for differentiated design on home appliance shells. Matte panels have outstanding practical advantages: soft reflection without glare, fingerprints and tiny scratches are not noticeable, which is widely used for mid-range home appliances, kitchen equipment and controller housings.

Selection comparison and applicable scenarios

High-gloss panels are used for premium TV panels, water purifier decorative plates and oven door panels for high-end minimalist positioning. Some adopt non-spray color masterbatch to skip painting and meet environmental requirements. This solution requires stable mold temperature equipment and clean workshop, as well as strict protection during packaging and transportation to prevent scratches. Indoor air conditioner shells, washing machine housings and small appliance main shells mostly choose fine matte grain for balanced appearance, hand feel and low after-sales complaint risk. A single housing can adopt mixed processes: display area and decorative strips use high-gloss surface while main shell adopts matte texture to enhance layering. Isolation is needed between different zones to avoid damaging adjacent surfaces during polishing or texturing.

injection mould

Mass production control and mold maintenance points

High-gloss molds need raw material drying and barrel cleaning to reduce precipitate accumulation on mirror surface. Special mold cleaner is used regularly, and hard tools are forbidden to touch the cavity directly. Matte texture molds focus on texture consistency. Residue accumulated in texture gaps will brighten the surface after long production, which needs regular cleaning. Laser engraved molds are more resistant to precipitate, yet their machining cost is higher than chemical etching. Sealed samples should be confirmed for both processes, including gloss value, texture standard and light source condition for inspection, to avoid acceptance disputes. There is no absolute superiority between high-gloss panels and matte textures. High-gloss design brings premium visual effect with higher mold cost, strict process control and poor scratch resistance. Matte texture features high fault tolerance, practicality and stable mass production. Engineers need to lock appearance scheme in early project phase, and complete matching design of steel, gate and draft angle to reduce mold modification cost.

injection mould

Home
Product
News
Contact